Water is seldom used in industrial plants in its original state from the municipal supply, well, or production process. The feedwater may contain suspended solids, hardness, dissolved salts, oils, organic matter, metals, microorganisms, or process chemicals. Without control, they may impact product quality, foul equipment, result in increased maintenance, or fail to meet discharge or reuse standards.
Industrial water treatment equipment, in simple terms, is the machines, water treatment units, instruments, and water treatment systems that are utilized to alter the quality of water for a specific application. It is important, therefore, that a water treatment equipment manufacturer properly match equipment to the water to be treated (feedwater), flow requirements, desired water quality, equipment room space and operating conditions. Modules for common duty may be supplied by a water treatment equipment supplier, whereas a bespoke combination of modules will be necessary when the process or site demands it, in which case custom water treatment equipment is used.
QILEE provides modular and integrated systems for pure water treatment, wastewater re-use, solid/liquid separation, membrane treatment, chemical dosing, and challenging industrial water treatment applications.
Water treatment equipment for industry is more likely to consist of a treatment train than a single machine. Systems can consist of screening, chemical dosing, dissolved air flotation (DAF), biological treatment, ultrafiltration (UF), nanofiltration (NF), reverse osmosis (RO), sludge dewatering, pumps, tanks, online analyzers, and controls.
The order of the sequence is application dependent. Depending on the wastewater type, oil and suspended solids may need to be removed prior to membrane treatment, and if the required process water is very pure, then pretreatment may be followed by UF and RO.
The operation of industrial equipment involves breaking up the treatment problem into stages. Physical, chemical, biological and membrane processes are combined according to the treatment objective.
Engineers can test suspended solids, pH, conductivity, hardness, organic loading, oil, dissolved salts, metals and other substances as appropriate to the application.
There may be periods of much higher flow or contaminant loading than the average, such as during batch production, cleaning cycles or shift changes.
These factors affect tank size, pump size, treatment chemical dosage, membrane area, material of manufacture, and pretreatment requirements. Design based on incomplete water information may result in undersized equipment, unwarranted water treatment stages, or an avoidable operating cost.
In the pretreatment stage, contaminants that would interfere with subsequent operations are removed.
The larger suspended material is removed by screens and filters. Chemicals can be used to modify the pH or aid coagulation and flocculation. To remove the suspended or floatable contaminants, DAF is designed to lift them by fine air bubbles. If the feedwater needs additional particulate or organic reduction, then the feedwater can be filtered through sand or carbon.
Pretreatment can decrease the load on downstream equipment and provide more stable operating conditions.
Biological treatment might be necessary for wastewater containing biodegradable organics. The MBR process is a combination of biological treatment and membrane separation processes, which retain the suspended biomass within the process and yield a clarified treated stream.
UF eliminates the fine suspended matter and microorganisms. NF offers more separation for dissolved substances of choice. RO is applied when there is a need to reduce dissolved salts to a great extent.
In QILEE, several of the integrated membrane and containerized industrial wastewater systems are listed, some of which involve combinations of MBR, tubular ultrafiltration, NF and RO, depending on the wastewater characteristics.
Conditioning may be required for process water and polishing may be necessary for wastewater prior to discharge or re-use.
Parameters like pH, conductivity, dissolved oxygen and application-specific parameters can be monitored by online analyzers. Continuous data enables operators to detect changes in the feedwater or treatment performance earlier.Parameters like pH, conductivity, dissolved oxygen and application-specific parameters can be monitored by online analyzers. Continuous data enables operators to detect changes in the feedwater or treatment performance earlier.
Where necessary, final treatment can also consist of disinfection, filtration and chemical adjustment.
|
Technology |
Main Function |
Typical Use |
|
DAF |
Removes suspended solids, oils and floatables |
Wastewater pretreatment |
|
Chemical dosing |
Adjusts pH and aids coagulation/conditioning |
Pretreatment and process control |
|
MBR |
Biological treatment followed by membrane separation. |
Organic wastewater treatment |
|
UF |
Filters out tiny particles and microorganisms |
Pretreatment and reuse |
|
NF |
Filters various contaminants from water. |
Advanced treatment |
|
RO |
Reduces dissolved salts |
Water re-use and process water. |
|
Sludge dewatering |
Dries sludge and removes water |
Residuals handling |
The equipment should be selected in a sequence, with each stage addressing a different treatment requirement.
A water treatment equipment manufacturer should convert water-quality requirements into equipment capable of being built, installed, operated, and maintained in the real site conditions.
This includes selection of process, sizing, layout, materials, instrumentation and controls, fabrication and commissioning preparation work.
QILEE’s water treatment equipment and modular systems include containerized systems, integrated modular systems, chemical treatment systems, membrane elements, online analyzers, and related equipment for industrial and municipal applications.
Custom Water Treatment Equipment is justified when standard equipment cannot effectively accommodate the water chemistry, hydraulic load, discharge target, reuse goal, footprint and/or installation conditions.
Customization can include varying the process sequence, membrane capacity, tank size, materials, controls, arrangement of pipework, or the layout of modules. It also may be required wherever equipment must fit in a container or skid for transport and installation.
Unless there is a process reason, which is beyond the scope of this article, the addition of stages or automation can increase capital and maintenance costs with no benefit in treatment performance.
A water treatment equipment supplier should request sufficient information about the project to be able to adequately assess the application. The representative water analysis, average and peak flow, operating time, required outlet quality, site space, and available utilities, as well as the planned reuse or discharge route, are useful inputs.
Those details make it easier to compare proposals based on process suitability rather than price alone. Buyers should also inquire about what stages are included, what sizing assumptions were used, what consumables are required, and how they will be serviced.
Industrial water treatment equipment functions by specifying various contaminants as being treated by the best treatment method. Pretreatment will safeguard downstream units, biological treatment will remove more contaminants, and monitoring is necessary to maintain the unit within its design specifications.
Thus, the selection of a water treatment equipment manufacturer should begin with the water data and treatment objectives and not with the catalogue model. A competent water treatment equipment supplier will be able to provide standard equipment that can be matched to simple tasks and custom water treatment equipment in instances in which the water chemistry, capacity, water reuse objectives and/or site constraints warrant a customized process.
The modular equipment range of QILEE enables this integrated approach in the fields of pure water, industrial wastewater, reuse, chemical treatment, membrane separation and online monitoring.
Tel: +86 13370035529
Business What's App: +86 13636655908
E-mail: qilee@qileegroup.com
Add: No. 351 Wenqu Road, Fengxian District, Shanghai