QILEE Ultrafiltration Membrane Technical Specifications
| Parameter Category | Specification Item | X55 | X75 |
| Component Parameters | Effective Membrane Area | 52 m² | 77 m² |
| Membrane Material | PVDF | PVDF | |
| Membrane Form | External Pressure Hollow Fiber Membrane | External Pressure Hollow Fiber Membrane | |
| Nominal Pore Size(¹) | 0.03 μm | 0.03 μm | |
| Membrane Fiber Inner and Outer Diameter | Standard | Standard | |
| Dimensions | Φ225×1860 mm | Φ225×2360 mm | |
| Interface Size | DN50 | DN50 | |
| Component Weight (wet) | 50 kg | 63 kg | |
| Membrane Operational Parameters | Maximum Inlet Turbidity(⁶) | 300 NTU | 300 NTU |
| Operational pH Range | 2~10 | 2~10 | |
| Temperature | 5~40°C | 5~40°C | |
| Filtration Method | Dead-end or Crossflow Filtration | Dead-end or Crossflow Filtration | |
| Maximum Inlet Pressure | ≤0.6 MPa | ≤0.6 MPa | |
| Operational Flux (⁰) | 30~120 L/m²·h, 25°C | 30~120 L/m²·h, 25°C | |
| Maximum Transmembrane Pressure Differential | ≤0.2 MPa | ≤0.2 MPa | |
| Backwash Flow Rate | 80~120 L/m²·h | 80~120 L/m²·h | |
| Produced Water Quality (⁴) | Backwash Pressure | ≤0.25 MPa | ≤0.25 MPa |
| Air Scour Inlet Pressure | ≤0.1 MPa | ≤0.1 MPa | |
| Maximum Module Inlet Air Pressure | ≤0.25 MPa | ≤0.25 MPa | |
| Air Scour Airflow | 4~12 Nm³/h•unit | 4~12 Nm³/h•unit | |
| Turbidity | ≤0.1 NTU | ≤0.1 NTU | |
| SDI₁₅ | ≤3.0 | ≤3.0 |
Notes:
● Nominal pore size tested under standard conditions
● Operational flux range depends on feed water quality
● Produced water quality guaranteed with proper pre-treatment
● Maximum inlet turbidity for short-term operation
Do You Have any Questions? Welcome to Leave Us a Message.
Tel: +86 13370035529
Business What's App: +86 13636655908
E-mail: qilee@qileegroup.com
Add: No. 351 Wenqu Road, Fengxian District, Shanghai